After the disastrous recall of every single one of its first model of derailleur (the SRAM ESP 900), SRAM boldly stuck with its dream, slightly redesigning the gear and sorting out the manufacturing process - and the 1996 SRAM ESP 9.0 and then the 1997 SRAM ESP 9.0SL were the results.

The design of the 9.0SL includes all SRAM’s signature features; the one-to-one actuation, the steeply angled slant parallelogram, the lack of float in the guide pulley and the single sprung pivot design with the top pulley wheel concentric (or, later, almost concentric) with the sprung pivot (all except one-to-one actuation and that 'almost' follow the basic design of the SunTour V GT).

When manufactured using ‘carbon composites’, with sealed bearing pulleys and an aluminium attachment bolt, the result was an extremely light and very capable gear. However, I personally still found it hard to believe that a plastic gear had the integrity of an aluminium design, and I found it hard to shake the unfair notion that this gear was a sophisticated toy.

A simplistic, but OK, way of dating the SRAM 9.0 SL is to look at the logos:

• 1997 saw the first of the logos on the outer parallelogram plate, a black, speedy, oval shape with the words 'ESP 9.0SL' within it, accompanied by red flashes.
• The second logo appeared in late 1997. It also has a black oval shape and red flashes, but sports the words 'SRAM 9.0SL'.
• 1999 (?) saw the third logo variant. This has no black oval shape but has the words 'SRAM 9.0SL' in rather elegant script.

---

This is a very lightly used example of SRAM ESP 9.0SL with the third type of logo (as described above). It has a mid-length, 74mm, pulley cage. Some key features include:

• The third generation logo (also discussed above).
• A guide pulley that is offset from the p-pivot.
• Composite inner and outer pulley cage plates.
• Allen head pulley bolts.

---

• Derailleur brands: SRAM
• Categories: SRAM - the original ESP derailleurs
• Themes: Ultra-lightweight - touring/mountain bike
• Country: USA, manufactured in Taiwan
• Date of introduction: 1999?
• Date of this example: September 1999 (inner pulley cage plate is very faintly labelled 'SEP 13 99')
• Model no.: 500-962TW?
• Weight: 188g
• Maximum cog: 32 teeth
• Total capacity: 38 teeth
• Pulley centre to centre: 74mm
• Index compatibility: 8 speed?
• Chain width: 3/32”
• Logic: top normal
• B pivot: unsprung
• P pivot: sprung
• Materials: carbon composite (plastic) knuckles and inner pulley cage plate, aluminium parallelogram plates and outer pulley cage plate.

Ref. 1655