DISRAELI GEARS

Charger (2nd style)

Charger (2nd style) main image

I have a soft spot for Charger derailleurs. They were, possibly, the first Taiwanese derailleurs that we were lucky enough to sell in our bike shop.

At the time (the early 1980s) Britain had a rich seam of bicycle manufacturers in financial distress. Once great brands got into financial trouble, were taken over by (alledgedly dodgy, certainly incompetent) businessmen, were resurrected (with much fanfare and hullabaloo) and (inevitably and almost immediately) got back into financial trouble etc. etc.... As these manufacturers ran out of cash, they failed to pay the importers of Shimano and had to move on to Huret. Then they failed to pay the importers of Huret and had to move on to Simplex. Then they failed to pay the importers of Simplex and had to move on to ... anything they could get their oily hands on. And so it came to pass that the occasional, brand new, bicycle fitted with a, then unknown, Charger derailleur arrived in our stock.

We were initially irritated and suspicious, but grudgingly came to grant them a modicum of respect. They were respectably made out of respectably substantial steel sheet. They were respectably finished with respectable chrome plating. And they were copies of the, extremely respectable, Shimano Skylark of the time - and so worked respectably well. In later years Taiwanese derailleur manufacturers competed by driving their prices down - and many of the products became less easy to like. But I have a certain, wistful, fondness for these early derailleurs.


I believe that this example is a, little used, mid-period, short-cage Charger, perhaps from 1985. Some of its features are:

  • The logo uses capital letters.
  • The cable adjuster is hexagonal.
  • The peg holding the cable adjuster is cylindrical without a flat side.
  • The pulleys have 'Charger' written on them in large letters.
  • The pulley cage rotation stop is a crude punchout.
  • The pulley cage plates are relatively thick forgings.


  • Derailleur brands: Charger
  • Country: Taiwan
  • Date of introduction: 1985?
  • Date of this example: unknown
  • Model no.: unknown
  • Weight: 295g including hanger plate
  • Maximum cog: 28 teeth
  • Total capacity: 28 teeth
  • Pulley centre to centre: 54mm
  • Index compatibility: friction
  • Chain width: 3/32”
  • Logic: top normal
  • B pivot: sprung
  • P pivot: sprung
  • Materials: steel

Ref. 795

Charger (2nd style) additional image 01
Charger (2nd style) additional image 02
Charger (2nd style) additional image 03
Charger (2nd style) additional image 04
Charger (2nd style) additional image 05
Charger (2nd style) additional image 06
Charger (2nd style) additional image 07
Charger (2nd style) additional image 08
Charger (2nd style) additional image 09
Charger (2nd style) additional image 10
Charger (2nd style) additional image 11
Charger (2nd style) additional image 12
Charger (2nd style) additional image 13
Charger (2nd style) additional image 14
Charger (2nd style) additional image 15
Charger (2nd style) additional image 16
Charger (2nd style) additional image 17